This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Bickel, F. Search for Related Content PubMed Articles by Bickel, F. Social Bookmarking                   What's this?

Untersuchungen Über Den Einfluß Der Belüftung Sowie Der Struktur Des Rottegutes Auf Den Rotteverlauf Bei Der Kompostierung Von Abwasserschlamm Examinations On the Effect of the Oxygen Supply and the Structure of the Bulking Agents On the Composting Process of Sewage Sludge

Institut für Siedlungswasserbau, Wassergüteund Abfallwirtschaft der Universität Stuttgart Abteilung Abfalltechnik, Bandtäle 1, D-7000 Stuttgart-80 (Büsnau), FRG

Experiments with the composting of municipal sewage sludge were made to examine the effect of different bulking agents and of the oxygen supply on the process. The bulking agents have been chopped straw, milled bark and sawdust as organic materials and Styropor—foamed polystyrene as a synthetic material. The bulking agents have been dried at 105°C and then mixed with the same quantity of digested municipal sewage sludge. Because of the different water capacity of each material different structures were reached. i.e. the free air space in the mixture differed, because each material extracted a different quantity of water out of the sludge. This effect can be seen in Table 1, while a scheme of the experiment is given in Figures 1 and 2.

In a second run the oxygen content was changed from 21 Vol-% to 50 Vol-% in dry air at the same rate of 17 1/h for 3 min in each hour. In both runs the composting process was followed by measuring the temperatures and the CO₂-rate in the exit air. For comparison two parameters have been calculated, the energy production and the carbon loss which are shown in Table 2. These results show that bark was the best bulking agent (2608 kJ and 45.4 g carbon loss), while the synthetic material produced almost no activity (326 kJ and 4.2 g carbon loss). The effect of the higher oxygen content can be seen by comparing the curves of the temperatures in Figs 3 and 4 showing the characteristic form. After reaching the maximum, the temperatures stayed for a longer time on a higher level during the second run, marking a higher activity of the process. The curves of the CO₂-rate given in the Figs 5 and 6 show the same effect.

Overall it is evident, that the structure of the mixture, i.e. the bulking agent has a greater effect on the composting process than the increased oxygen content.

Key Words: Composting • municipal sewage sluge • oxygen supply • heat production • carbon loss • CO2 concentration • temperature curves • bark • straw • foamed polystyrene.

CiteULike    Connotea    Del.icio.us    Digg    Reddit    Technorati    What's this?