Waste Management & Research

 

Advanced Search

Journal Navigation

Journal Home

Subscriptions

Archive

Contact Us

Table of Contents

Click here to sign up for SAGE Journal Email Alerts today!

Sign In to gain access to subscriptions and/or personal tools.
This Article
Right arrow Full Text (PDF)
Right arrow References
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to Saved Citations
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Request Reprints
Right arrow Add to My Marked Citations
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Roy, S.
Right arrow Articles by Gupta, R. N.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Roy, S.
Right arrow Articles by Gupta, R. N.
Social Bookmarking
Add to CiteULike   Add to Connotea   Add to Del.icio.us   Add to Digg   Add to Reddit   Add to Technorati  
What's this?
Waste Management & Research, Vol. 25, No. 5, 475-482 (2007)
DOI: 10.1177/0734242X07076944

Use of gold mill tailings in making bricks: a feasibility study

Surendra Roy

National Institute of Rock Mechanics, Champion Reefs, Kolar Gold Fields, Karnataka, India, surendraroydhn{at}yahoo.com

Govind R. Adhikari

National Institute of Rock Mechanics, Champion Reefs, Kolar Gold Fields, Karnataka, India

Rama N. Gupta

National Institute of Rock Mechanics, Champion Reefs, Kolar Gold Fields, Karnataka, India

Mill tailings dumps at Kolar Gold Fields, Karnataka, are creating environmental problems. One of the solutions to these problems is to use the mill tailings for some useful purpose. This study examined the possibility of making bricks from the mill tailings with some additives in laboratory experiments. Samples of the mill tailings and the additives were analysed for particle size distribution, Atterberg limits and specific gravity. The plasticity index of the mill tailings being zero, they could not be used directly for making bricks. Therefore some additives that had plasticity or binding properties were mixed with the mill tailings. Ordinary Portland cement, black cotton soils and red soils were selected as additives. Each of the additives was mixed separately with the mill tailings in different proportions by weight and a large number of bricks were prepared using metallic moulds. The bricks were termed as cement— tailings bricks or soil—tailings bricks, depending on the additives used. The cement—tailings bricks were cured for different periods and their corresponding compressive strengths were determined. The bricks with 20% of cement and 14 days of curing were found to be suitable. The soil—tailings bricks were sun-dried and then fired in a furnace at different temperatures. The quality of bricks was assessed in terms of linear shrinkage, water absorption and compressive strength. The cost analysis revealed that cement—tailings bricks would be uneconomical whereas the soil—tailings bricks would be very economical.

Key Words: Gold mill tailings • tailing utilization • brick making • Kolar Gold Fields • wmr 1113—5


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us   Add to Digg Digg   Add to Reddit Reddit   Add to Technorati Technorati    What's this?